Fusion 360 Tips – Set Current View As

Fusion 360 Tips – Set Current View As

Fusion 360’s View Cube is an essential user interface element in Fusion 360. You must become familiar with it, and how it impacts your workflow to truly feel comfortable when using Fusion. Visually and functionally it’s very similar to what you will find in many other Autodesk CAD products. The view cube influences the following…

Fusion 360 Tips – Keyboard Shortcuts

Fusion 360 Tips – Keyboard Shortcuts

Autodesk Fusion 360‘s keyboard shortcuts are now customisable, but the original default shortcuts also remain. Earlier in 2018 the Fusion developers released support for customisable shortcuts, you can now setup a shortcut for any command by clicking on the ellipsis button next to each command in the menus.

Fusion 360 Tips – New Component

Fusion 360 Tips – New Component

One of the most important tips you can know when starting out with Fusion 360, is to create a New Component before you do anything else. This is true 95% of the time. If you are only designing a single component, like a bolt, then there is no need. But if you wanted to model…

Notch, bend, and straighten in Inventor

Notch, bend, and straighten in Inventor

I was asked recently if there was a method to notch, bend, and straighten hollow sections using Inventor.  I’ve discovered a couple a couple of methods, both of which are shown below.  There are probably more, but these two look worthy of sharing.  If you have any feedback or want to suggest an alternative, please…

CADPRO Systems Ltd acquires Salesoft CAD Solutions Ltd

CADPRO Systems Ltd acquires Salesoft CAD Solutions Ltd

Effective Thursday 23rd June 2016, the amalgamation of these two businesses will create the largest New Zealand owned Autodesk reseller with over 20 staff based in Auckland and Christchurch. The integration of Salesoft CAD Solutions into CADPRO Systems Ltd is a positive move for the Autodesk user community in New Zealand. Hans Grootegoed, Managing Director…